Post by ††§p¡de®Mønk©¥†† on Mar 9, 2006 16:07:13 GMT -5
This some thing that is really helpful at school have phun 
Have you ever tried to impress your friends by picking one of those Master
combination locks and failed? Well then read on. The Master lock company has
made this kind of lock with a protection scheme. If you pull the handle of it
hard, the knob won't turn. That was their biggest mistake...... Ok, now on to
it.
1st number. Get out any of the Master locks so you know what's going on.
1: The handle part (the part that springs open when you get the combination),
pull on it, but not enough so that the knob won't move. 2: While pulling on it
turn the knob to the left until it won't move any more. Then add 5 to this
number. Congradulations, you now have the 1st number.
2nd number. (a lot tougher) Ok, spin the dial around a couple of times,
then go to the 1st number you got, then turn it to the right, bypassing the 1st
number once. WHEN you have bypassed. Start pulling the handle and turning it.
It will eventually fall into the groove and lock. While in the groove pull on
it and turn the knob. If it is loose go to the next groove; if it's stiff you
got the second number.
3rd number: After getting the 2nd, spin the dial, then enter the 2 numbers,
then after the 2nd, go to the right and at all the numbers pull on it. The lock
will eventually open if you did it right. If can't do it the first time, be
patient, it takes time.
Have you ever tried to impress your friends by picking one of those Master
combination locks and failed? Well then read on. The Master lock company has
made this kind of lock with a protection scheme. If you pull the handle of it
hard, the knob won't turn. That was their biggest mistake...... Ok, now on to
it.
1st number. Get out any of the Master locks so you know what's going on.
1: The handle part (the part that springs open when you get the combination),
pull on it, but not enough so that the knob won't move. 2: While pulling on it
turn the knob to the left until it won't move any more. Then add 5 to this
number. Congradulations, you now have the 1st number.
2nd number. (a lot tougher) Ok, spin the dial around a couple of times,
then go to the 1st number you got, then turn it to the right, bypassing the 1st
number once. WHEN you have bypassed. Start pulling the handle and turning it.
It will eventually fall into the groove and lock. While in the groove pull on
it and turn the knob. If it is loose go to the next groove; if it's stiff you
got the second number.
3rd number: After getting the 2nd, spin the dial, then enter the 2 numbers,
then after the 2nd, go to the right and at all the numbers pull on it. The lock
will eventually open if you did it right. If can't do it the first time, be
patient, it takes time.
